The illustration shows proper lifter placement for a Round Ring binder. Note that two sheet lifters are used, and they are placed between the paper and the ring back, with the curvature facing inwards.
The next question is the size of the ring. Ring sizes are usually expressed in nominal inches. For example, 1″, 1.5″, 2″, etc. The table below lists the appropriate Sheet Lifter for each size of Round Ring Binders. Where more than one Sheet Lifter is listed, the top lifter is preferable.
Ring Size | Sheet Lifter | Description* | |
---|---|---|---|
0.5" | PC2113 | 2" x 11" Curved | Buy It |
1" | PC2113 | 2" x 11" Curved | Buy It |
1.5" | PC3113 PM3113 PC2113 |
3" x 11" Curved 3" x 11" Molded 2" x 11" Curved |
Buy It Buy It Buy It |
2" | PG4113 PM3113 PC3113 |
4" x 11" Gull-Wing 3" x 11" Molded 3" x 11" Curved |
Buy It Buy It Buy It |
2.5" | PG4113 PF5113 |
4" x 11" Gull-Wing 5" x 11" Flat |
Buy It Buy It |
3" | PF8113 PF5113 |
8.5" x 11" Flat 5" x 11" Flat |
Buy It Buy It |
4" | PB8113 PF8113 |
8.5" x 11" Boomerang 5" x 11" Flat |
Buy It Buy It |
5" | PB8113 PF8113 |
8.5" x 11" Boomerang 5" x 11" Flat |
Buy It Buy It |